Archive | Energy Management

Installation of Power Plant: 7 Factors

Some of the factors to be considered while installing a power plant are as follows: 1. Selection of Power System 2. Location of Plant 3. Building Layout 4. Selection of Prime Mover 5. Selection of Operating Conditions 6. Cost 7. Selection of Units. Factor # 1. Selection of Power System: The type of power plant to be installed depends upon [...]

By |2016-11-02T06:00:13+05:30November 2, 2016|Energy Management|Comments Off on Installation of Power Plant: 7 Factors

Storage of Energy: 2 Mechanical Methods

This article throws light upon the top two mechanical methods used for storage of energy. The methods are: 1. Pumped Hydro-Electric Storage 2. Compressed Air Storage. Mechanical Method # 1. Pumped Hydro-Electric Storage: In this system, electric power in excess of the immediate demand is used to pump water from a supply source (e.g., lake, river or reservoir) at a [...]

By |2016-11-02T06:00:13+05:30November 2, 2016|Energy Management|Comments Off on Storage of Energy: 2 Mechanical Methods

Energy Audit and Its Types | Energy Management

After reading this article you will learn about:- 1. Meaning of Energy Audit 2. Objectives of Energy Audit 3. Types 4. Report. Meaning of Energy Audit: Energy audit is an official scientific study of energy consumption of an organisation/process/plant/equipment aimed at reduction of energy consumption and energy costs without affecting productivity and comforts and suggesting the methods for energy saving [...]

By |2016-11-02T06:00:13+05:30November 2, 2016|Energy Management|Comments Off on Energy Audit and Its Types | Energy Management
Go to Top